This product is an evaluation board of Toshiba image recognition processor "TMPV760 series". It consists of a CPU board, image output board, image input board, IO board, and sub board, and by combining it, it provides the optimum interface. TMPV7608 is mounted to the CPU board.
【BDS050: TMPV7608 EVA Board】
CPU Board are mounted CPU and memory. TMPV7608CPU Board is mounted 2Gbyte of LPDDR2 memory. Power is supplied from Video Output Board(VO-1A) for operate those boards. JTAG Connector and USB Connector(convert from UART) are mounted for debug.
CPU BOARD PARAMETER | SPECIFICATIONS |
---|---|
CPU | TMPV7608XBG |
LPDDR2 memory | 4Gbit x 4 (Total 2GByte) |
SPI flash memory | 512 Mbit x 1 (64MByte) |
USB interface 1 | FT232RL x 1 port |
USB interface 2 | FT232HL x 1 port |
Size | W:130.0mm X D:80.0mm |
Operating Temperature/Humidity | 0 ~ 35℃ / 10 ~ 90%r.H.(Non-Condensing) |
Preservation Temperature / Humidity | 0 ~ 80℃ / 10 ~ 90%r.H.(Non-Condensing) |
VO-1A Board is one of Video Output Board. It converts to HDMI output from VOIF output of CPU. HDMI Output is 1ch. And this EVA Board mounted power circuit.
VO-1A BOARD PARAMETER | SPECIFICATIONS |
---|---|
Power IC | +5V, +3.3V, +1.8V, +1.2V, +1.1V, +0.6V, etc |
Power monitor IC | 2pcs |
Parallel to HDMI | ADV7513 (or compatible) x 1pcs |
Main power supply | +12.0V±5%, Center plus, PL03B |
Size | W:130.0mm X D:100.0mm |
Operating Temperature/Humidity | 0 ~ 35℃ / 10 ~ 90%r.H.(Non-Condensing) |
Preservation Temperature / Humidity | 0 ~ 80℃ / 10 ~ 90%r.H.(Non-Condensing) |
VI-1 Board converts HDMI Input video data to VIIF format that can input to VIIF to CPU. HDMI Input are 2ch.
VI-1 BOARD PARAMETER | SPECIFICATIONS |
---|---|
Power IC | +2.5V, +1.2V, etc |
HDMI to MIPI | TC358743 (or compatible) X 2pcs |
MIPI to Parallel | TC358746 (or compatible) X 2pcs |
CLOCK Buffer | 2pcs |
I2C expander | 1pcs |
Size | W:150.0mm X D:100.0mm |
Operating Temperature/Humidity | 0 ~ 35℃ / 10 ~ 90%r.H.(Non-Condensing) |
Preservation Temperature / Humidity | 0 ~ 80℃ / 10 ~ 90%r.H.(Non-Condensing) |
IO Board provide various interfaces of the CPU.
It's mounted GPIO, UART, CAN, I2C, LED, DIPSW, etc, as general purpose interface.
IO BOARD PARAMETER |
SPECIFICATIONS |
---|---|
CAN transceiver | 3pcs |
Buzzer | 1pcs |
GPIO LED | Green 8pcs |
ALARM LED 0 | Green 1pcs |
ALARM LED 1 | Red 1pcs |
Size | W:100.0mm X D:60.0mm |
Operating Temperature/Humidity | 0 ~ 35℃ / 10 ~ 90%r.H.(Non-Condensing) |
Preservation Temperature / Humidity | 0 ~ 80℃ / 10 ~ 90%r.H.(Non-Condensing) |
SUB-4 Board converts Input video data to HDMI format that can input to MIPI-CSI2 of CPU. HDMI Input are 4ch.
SUB-4 BOARD PARAMETER |
SPECIFICATIONS |
---|---|
Power IC | +5.0V, +3.3V, +2.5V, +1.2V, etc |
HDMI to MIPI | TC358743 (or compatible) 4pcs |
Size | W:110.0mm X D:80.0mm |
Operating Temperature/Humidity | 0 ~ 35℃ / 10 ~ 90%r.H.(Non-Condensing) |
Preservation Temperature / Humidity | 0 ~ 80℃ / 10 ~ 90%r.H.(Non-Condensing) |
※This product does not use in-vehicle compatible parts. For circuit design of in-vehicle products, please use in-vehicle compatible parts.
※All brands and product names are trademark or register trademarks of their respective companies.
※All configurations are subject to change without notice.
Copyright © 2017 Sohwa & Sophia Technologies All Rights Reserved.