Sohwa & Sophia Technologies

NDB Writer - Printed circuit design CAD data conversion software

ndb_wr

It is a tool which changes a CAD Data into the NDB file which can read the gratis viewer tool
NDB LightViewer
The effect by cooperation (collaboration) is offered in a design review, and manufacture support and various scenes.

FAQ

About a corresponding CAD system

1.CR-5000/PWS*( Rev.10 - Rev.22 )
Required preparation file :BSF/MDF/UDF/WDF/CCF/WSF
Arbitrary preparation file :PMA/Hole-Type definition file/inserter file
2.CR-5000/BD*( Rev.5.x - Rev.14.x )
Required preparation file : PCF/FTF/CDF/PKF
3.Allegro(PE13.0 - SPB16.5)
Required preparation file :CMP/FGO/LAY/NET/PAD/PIN/SYM/NLT/PSK/UPC/TEC/TXT/CLS
Arbitrary preparation file :Flash/Thermal definition Information
4.CADVANCE-alpha*( Ver5.5 Rev4 - Ver6.5 Rev12/alpha III Ver2.2 )
Required preparation file :DBG/DBR/Thermal slit definition file
Arbitrary preparation file :NET
5.DK-Magic/sigma * (Ver12.00)
Required preparation file :DBL/CMP/NET
6.CR-5000SD
Required preparation file :EDF(EDIF2000 LEVEL0 )
7.OrCAD CAPTURE
Required preparation file :EDS
8.DxDesigner
Required preparation file :EDF(EDIF2000 LEVEL0 )

*: Ask for details.
*: Various ASCII input-and-output software currently sold by the appearance like a CAD vendor is required.
*: All the brand names indicated are the trademarks and registered trademarks of each company.

About a hardware requirement

Hardware requirement of recommendation

1.NDB Writer for PCB (Converter)
    CPU： More than 1GHz (recommendation)
    Memory：More than 1GB (recommendation)
    OS： Windows 2000/Windows XP/Windows Vista/ Windows 7
2.NDB Light Viewer for PCB (Viewer)
    CPU： More than 1GHz (recommendation)
    Memory：More than 1GB (recommendation)
    OS： Windows 2000/Windows XP/Windows Vista/ Windows 7

*: All the brand names indicated are the trademarks and registered trademarks of each company.

About a license form

1.Network license :
    That it can work simultaneously is a purchased licensed part.
    Use is possible at two or more sets.
    However, also when specifying the installable number of terminals, it is a certain .
2.Node lock license：
License Fixed is carried out at the installed specification terminal.
License is distributed by a hardware key.

*: Base license is a network license.
*: "NDB Light Viewer for PCB" is a free license.

About processing time

1. Precondition   Machine Spec
    CPU: Core2 Quad, 2.8GHz
    Memory: 3GB
2. Processing Time Sample by Electrical circuit boards Pattern
-     -Sample1
        10layers / About 4300 parts
        Data conversion time ≒ 15minutes
-     -Sample2
        6layers / About 1700 parts
        Data conversion time ≒ 9minutes
-     -Sample3
        6layers / About 1000 parts
        Data conversion time ≒ 3.5minutes
-     -Sample4
        4layers / About 45 parts
        Data conversion time ≒ 3 seconds
3. Special Mention Matter
In the case of the same Data Requirementses, if there is much quantity of a Final, a conversion Time will increase.
In the case of the same Data Requirementses, a Time will be influenced if there are many Parts Types.

*: It is a premise that it is the above-mentioned machine spec.
*: A conversion Time changes with creation states of a Data.

Sohwa & Sophia Technologies engineering solutions provider

NDB Writer - Printed circuit design CAD data conversion software

FAQ