Multifunction Analyzer - FAQ | Sohwa & Sophia Technologies

Multifunction Analyzer [Discontinued Products]

MFA_TOP

Because of the low cost and multi-functions, not only speed up the development efficiency, but also possible to let all engineers have their own tool/environment.
[Discontinued Products]

Multifunction Analyzer

Please order this product at Chip One Stop website below.

FAQ

Frequently asked questions are listed on this page. We will add the information when updated.

Common

How to provide power to Multifunction Analyzer

Only by AC adaptor

How to operate Multifunction Analyzer

Multifunction Analyzer is operated by PC application and displays the results on PC.

How to get PC application software and manual

They can be downloaded from our website.

How to update the PC application

Users can download the latest PC application from our website during the period of valid support service.

When Multifunction Analyzer is connected to PC by LAN, should I use a cross LAN cable or a straight LAN cable?

Either cable may be used. Multifunction Analyzer has a capability to change the signal by automatically discriminating between a cross cable and a straight one.

How to setup when Multifunction Analyzer is connected to PC by LAN

Users can setup by using a special tool in the PC application. Please refer to the installation manual for more details.

Is it possible to operate several functions of Multifunction Analyzer at the same time?

Yes, it is.

Is it possible to install PC application in several PCs?

Yes, it is. Please read the End-User License Agreement carefully when you install the PC application.

Is it possible to start PC application without connecting to Multifunction Analyzer?

Yes, it is.

Is it possible to operate several Multifunction Analyzers by one PC?

Because one PC application controls one Multifunction Analyzer unit, you need to select one Multifunction Analyzer for operation when several Multifunction Analyzer units are connected. You cannot operate several Multifunction Analyzer units by one PC application at the same time.

Oscilloscope

What is Oscilloscope function?

It is a function to visualize electrical signals. Displays graphs showing voltage in a vertical direction and time in a lateral direction.

Is Oscilloscope an insulation type?

No. It is anon-insulation type.

Logic analyzer

What is Logic analyzer function?

It is a function for measuring operation of logic circuit. Observes several signals at the same time and indicates 1 or 0 for each signal by determining digitally.

Is it possible to bus-display signal lines of Logic analyzer?

Yes, it is.

Pattern generator

What is Pattern generator function?

It is a function to generate plural digital signals produced at will

Is it possible to indicate waveform acquired by Logic analyzer in Pattern generator?

Yes, it is. However, the number of the output signal follows the Pattern generator specification.

Digital multi meter

What is Digital multi meter function?

It is a function to measure values of voltage, current and resistor.

Simple DC supply

What is simple DC supply?

It is a function to output any direct current.

JTAG checker

What is JTAG checker function?

It is a function to check if devices connected by JTAG operate correctly and to display the information of devices connected by JTAG. The above check is helpful to confirm the signal wiring of JTAG chain has no problem.

Auto report generator

What is Auto report generator?

It is a function to execute automatically in the order of functions selected by mouse to be executed. The execution result will be output and reported in the Excel format.

Sohwa & Sophia Technologies engineering solutions provider